Top 10 Water Line Valve – Water Coolers

As an Amazon Associate I earn from qualifying purchases.

1. Elkay


Single, Light Gray Granite, Elkay LZS8WSLP Bottle Filling Station and Cooler

Elkay #ad - Green ticker informs user of number of 20 oz. Plastic water bottles saved from waste. The 3, chlorine, class 1 particulate, 000-gallon filter is certified to NSF 42 and 53 for lead, taste and odor reduction. Visual filter monitor with led filter status indicator. Fillsafe recognition automatically recognizes new filter and updates LED light back to green. Fill rate is 1. 1 gpm. Touchless, sensor activation bottle filler designed for easy use; easy-to-operate push-bar activation bubbler.
BrandElkay #ad
ManufacturerElkay #ad
Height39.4 Inches
Length18.4 Inches
Weight60 Pounds
Width19 Inches
Part NumberLZS8WSLP



White, EFIELD Pex Pre-assembled Ice Maker Outlet Box, 1/2-Inch Pex F1807 Crimp with Installed 1/4-Turn Ball Valve

EFIELD #ad - Working temperature is 34° f to 180° F, Working pressure is 125 PSI. Pre-installed 1/4 turn lead-free brass valve;. The snap-on faceplate dimensions are 6-1/2 inch x 5 inch; The rough opening is 5 inch x 3-1/2 inch x 2-3/4 inch. Complies with nsf 61-g requirementsportable water standard. The box with one-piece box-and-flange design, no additional support framing required. Equipped with a 1/2 inch crimp PEX inlet and 1/4 inch OD compression outlet connections.
BrandEFIELD #ad
ManufacturerEFIELD #ad
Part NumberMH

3. Metpure


Metpure TKLS-CK Tankless Water Heater natural propane gas Isolation Valve 3/4" Kit | Compatible Noritz Rheem Rinnai Takagi Navien Service Flushing Valves| Lead-Free Complete Easy to Install Flush Kit

Metpure #ad - Compatibility: works with all 3/4" lines propane and natural gas tankless water heater brands such as Rinnai, Rheem, Noritz, Takagi, Navien and many more. Certified components: the components are certified lead free including the isolation valve kit with NSF certification.

The kit comes in high quality isolation valve service kit with full flow gas line, water lines, and fittings. Complete set: this kit was put together by field technicians and plumbers and field tested by the same group, so you can feel confident that the components work as they should in many years of usage. The main isolation valve set is factory tested to be leak free so you can be confident that your heater can be maintained periodically during each flushing sequence.

Versatile applications: this kit could be used in both residential and commercial gas tankless water heater applications with maximum water pressure at 150psi and 200k BTU gas rating. Top quality: this complete kit includes all components that are crafted from high quality materials for years of usage. You will also find upc and cSA certifications on the water flex and the gas flex as a proof of their authenticity.
BrandMetpure #ad
ManufacturerMetpure #ad
Part NumberTKLS-CK

4. BlueStars


Replaces AP4451762 PS3536019 AH3536019, Exact Fit for LG & Kenmore, Ultra Durable MJX41178908 Refrigerator Water Inlet Valve DIRECT Replacement for OEM Part by BlueStars, Easy to Install

BlueStars #ad - Premium quality: the replacement part is made from durable high quality material and well-tested by the manufacturer - Meets OEM standards - Ensure long-lasting and effective performance. It will restore proper water flow to your refrigerator’s water dispenser.

Replaces part numbers: ap4451762, 1398828, lfx21971st03, lfx25961al01, lfx21980st01, lfx21975st02, lfx25960sb, ah3536019, fits models: lfx21971st01, lfx21975st01, ps3536019, lfx21971st02, kenmore, LFX25961AL, LFX21975ST03, EA3536019. Fix common symptoms: you need to replace this part if your refrigerator won’t dispense water or leaks water onto the floor.

Customer satisfaction is our priority. Buy with confidence! model number: mjx41178908 refrigerator Water Inlet Valve - Single Coil. Easy to install: it is made exactly fit for most top name brands lg, lfx25960sw, etc. If for any reason you're not completely satisfied, you can ask for a replacement or FULL refund, no questions asked.
BrandBlueStars #ad
ManufacturerBlueStars #ad
Height3.4 Inches
Length5.1 Inches
Width3.5 Inches
Part NumberMJX41178908
ModelMJX41178908 AP4451762 PS3536019



Food Grade Fridge Ice Maker Water Installation Kit,1/4 In O.D. 25 FT Water Tubing with Feed Water Adapter and Quick Fittings for RO Filter System,Refrigerator,Ice Maker, Refrigerator Water Line Kit

HAOCHEN #ad - Easy installation:the fittings in the water line kit are standard and Push-in quick connect. Also a clear installation instructions help you complete your work in minutes. Include all parts you need:25 ft 1/4" od tubing, 1/4"-3/8" straight fittinga 1/4" adapter, and a compression fitting set 2 insert, a 1/4" shut off valve, a 3/8" x 1/4" x 3/8" tee for 3/8" outlet water filters, 1/4" straight fitting, 2 sleeve, a 3/8"-3/8"-1/4" or G1/2”-G1/2”-1/4”feed water adapter, a 1/4" x 1/4" x 1/4" tee(for 1/4" outlet water filters), 1 nut.

Prime quality accessories:The accessories in our kit are extremely safe and durable, there is no need to consider replacement for several years. Widely compatibility:our water line kit is suitable for most standard under sink filtration system or reverse osmosis systems 1/4"or 3/8" Outlet, and most brand and models refrigerator, ice maker, water dispenser.

Safe material:our ice maker water line kit is made by food grade materials, have tested to meet NSF/ANSI standards and BPA free;The water line splitter is lead free brass,chrome-plated for cold potable water. Ensure you and your family enjoy crystal ice cubes and delicious pure water.
BrandHAOCHEN #ad
ManufacturerHAOCHEN #ad

6. Eastman


18" Length, Silver, Eastman 48232 Flexible Water Heater Connector 3/4" FIP x 3/4" Push-fit Ball Valve

Eastman #ad - Measurement- the water heater hose with ball valve by eastman measures 18 inches in length features an included 3/4-inch push-fit shut-off valve and a 3/4-inch nickel-plated brass nut.

Quality- made of flexible braided stainless steel to prevent kinking and crimping. Easy installation- features a 3/4-inch push-fit shut-off valve for hassle-free installation and is compatible for use with copper, CPVC, and PEX pipe. Burst proof and no leak- maximum burst pressure is 1200 pSI and the maximum working temperature is 221° F 105°C. Safety- this water heater connector is UPC, CSA approved, and complies with Low Lead plumbing law.
BrandEastman #ad
ManufacturerEZ-FLO #ad
Height1 Inches
Length18 Inches
Width1 Inches
Part Number48232

7. SharkBite


Copper, PEX Pipe, U3088FLEX18BVLF, PE-RT, Push To Connect Brass Plumbing Fitting, HDPE, CPVC, SharkBite 3/4 Inch Ball Valve x 3/4 Inch FIP x 18 Inch Stainless Steel Braided Flexible Water Heater Connector

SharkBite #ad - Specs: sharkbite water heater connectors feature a maximum working temperature of 200 degrees F and a maximum working pressure of 200 PSI; approved for gas water and electric heaters with flue vent. Easy to install: this brass push water heater fitting reduces the need for additional transition fittings; allows for quick and easy installation, glue, with no tools, crimping, or soldering required; remove using a disconnect clip or disconnect tongs.

Sharkbite water heater connector: this portable water heater connector offered in braided stainless steel allows you to connect water heaters with existing pipes that don't line up quickly and easily; ideal for working in tight spaces.

Preferred by the pro: sharkbite tools and fittings meet the same high standards for commercial and residential plumbing applications; suitable for commercial repairs or home improvement projects; ensures clean, leak-free connection and is lead-free. Versatile: this flexible water heater coupling works well with PEX tubing, PE-RT, CPVC, and copper pipes; integrated ball valve allows for easy shut off.
BrandSharkBite #ad
ManufacturerCash Acme #ad
Height5 Inches
Length19.25 Inches
Weight0.68 Pounds
Width7.25 Inches
Part NumberU3088FLEX18BVLF
WarrantyLimited 25 Year

8. Honeywell


Gas Valve,70000 BtuH Cap,1/2" Inlet Sz

Honeywell #ad - It is designed for use in Standing Pilot applications using an immersion well for water temperature sensing. Water heater gas valve, Standing Pilot With Piezo,. An included integrated ntc temperature sensor reads water temperature within the appliance up to 221 F 105 C. The wt8840 series is the water heater control for trade use to replace wv8840 valves used in aosmith and Bradford White Water Heaters. Product dimensions: 6. 0 x 6. 0 x 4. 0". Brand name: honeywell. Country Of Origin: Mexico.
BrandHoneywell #ad
ManufacturerHoneywell #ad
Height4 Inches
Length6 Inches
Weight2.2 Pounds
Width6 Inches
Part NumberWT8840A1000/U

9. Cenipar


700,B2015-S85,B2017-S85, 600, Cenipar 4040 Humidifier Water Solenoid Valve 24 Volts 2.3 Watts Blue Line Fits A-prilaire Humidifier Replaces Valve 400, 500

Cenipar #ad - Make the indoor air humid, 560a, 112, 550, 400A, so you have an unprecedented sense of happiness!. Usage : 4040 humidifier water solenoid valve is fit for a-prilaire humidifier 220, 558, 350 and 360 When the indoor air is dry, 700m, 700, 560, 600, 445, 500a, 500m, 400m, 760 and 768.

Please note: does not work on models 330, 600a, 224, 600m, 440, 550a, 110, 700a, 500, 400, the 4040 humidifier solenoid valve can control the circulating humidity of the humidifier. High quality:the 4040 humidifier water solenoid Valve is made of strong & durable solid brass materials. Part number: cenipar 4040 humidifier water solenoid valve 24 volts 2. 3 watts, 60 hz. Replace part no. B2015-s85, b2017-s85. The 4040 solenoid valve has a 7/16"-24 UNS thread and is used to accept compression fittings for ¼" tubes.

The package list includes compression nut, washer and inline strainer. It is take probably 10min to install the Water Solenoid Valve. Screwdriver and wrench are all need!save you money to fix your A-prilaire Humidifier install of changeing it!! Please note: 1 year warranty!ask us if you have any questions, and we will solve it for you right away. Easy installation : the 4040 humidifier water solenoid valve are easy to install.
BrandCenipar #ad
ManufacturerCenipar #ad
Height3.2 Inches
Length2.2 Inches
Width1.6 Inches
Part Number4040
Warranty1 year.



1/2-Inch Sweat with Installed 1/4-Turn Ball Valve with Copper Water Hammer Arrestor, EFIELD Sweat Pre-assembled Ice Maker Outlet Box

EFIELD #ad - The working temperature is 34° f to 180° F, Working pressure is 250 PSI. The snap-on faceplate dimensions are 6-1/2 inch x 5 inch;. Equipped with 1/2 inch sweat inlet x 1/4 inch OD compression outlet connections;. The rough opening is 5 inch x 3-1/2 inch x 2-3/4 inch;. Pre-installed 1/4 turn lead-free brass valve with stainless steel water hammer arrestor; Complies with NSF 61-G Requirements Portable Water Standard.
BrandEFIELD #ad
ManufacturerEFIELD #ad
Part NumberMH